Shin Guard Worldcup Pro

To ensure adequate protection, the shin guard and forearm protector must be firmly attached to the extremities. This product is designed to provide protection of the extremities from low force contact that may be caused by the FIS standard approved race gates and slalom poles placed along the race course. In alpine racing, however, not all possible incidents and accidents that could have an impact on the protectors and/or the human body can be ruled out, also due to the high speed of the skier or snowboarder. After purchase, it is recommended not to use the protectors for longer than three years, as the materials can change their mechanical properties over time and impair the protective effect. Before and after each use, the protectors should not be exposed to sunlight or other sources of light and heat. Only water and non-aggressive soap may be used for external cleaning; solvents, petrol, lubricants or other chemical solvents must not come into contact with the protectors, as these can otherwise affect the structure and functionality of the protectors. Shin guards: Protector K: protector for knee and shin (proximal); Type A: PS04PICC/PS18: for small protectors; Type B: PS04GR: for large protectors. Shin protectors for alpine skiing comply with the provisions of Regulation EU 2016/425 on personal protective equipment for the intended area of use and have been tested in accordance with the requirements for Category II PPE. The shin protectors were developed in accordance with the UNI EN 1621-1 standard.